AUDAC COM3 instalacijsko pojačalo 30W
The COM3 is a public address amplifier with a power up to 30 Watt. It contains 2 unbalanced stereo line level inputs, which are switchable between Line and Microphone level and one Microphone level Input. This way, a maximum of 3 balanced microphones can be connected.
The output level is selectable between high impedance 100V, 70V and 25V outputs, or 4 Ohm low impedance.
It is equipped with an advanced protection circuit, which protects against DC short circuit, overheating, overload and limits the signal when necessary.
All control functions such as individual channel volume controls, a 2 band tone control, the master volume control and indicators like a VU LED bar and clipping LED’s are located at the front of the amplifier.
19” adapters are seperately available (COM6BKT).
RMS Power: 30 W
Input impedance Mic 1-3: 20 kOhm balanced
Input impedane Aux 2-3: 10 kOhm unbalanced
Frequency response -3dB: 50 Hz - 15 kHz
THD+N by 1kHz: < 1%
Signal to noise ratio: > 100 dB
Power supply: 230 V AC / 50-60 Hz
Input sense Mic 1-3: -50 dB to -6 dB
Input sense Aux 2-3: -30 dB to +14 dB
Input sense Tele paging: 0 dB - 600 Ohm balanced
Output level: 100 V - 333 Ohm; 70 V - 163 Ohm; 25 V - 21 Ohm; 11 V - 4 Ohm
Protection: DC short circuit, Overheat, Over load, Signal limiting
Dimensions (Width x Height x Depth): 270 x 76 x 230 mm
Weight net: 4.5 kg
Connector: Mic 1 Input - 6.3 mm Jack connector; Mic / Aux 2 & 3 - Stereo RCA & 6.3 mm Jack connector; Tele-Paging - 3-Pin Terminal Block (3.81 mm); Output - 4-Pin Terminal Block (5.08 mm)
SHIPPING & ORDERING:
Packaging: Carton box
Shipping weight and volume: 5.6 kg - 0.02 m3
Optional accessories: COM6BKT 19” adapter